ec4408c no. a0529-1/4 features 4v drive. halogen free compliance (ul94 hb). specifications absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit drain-to-source voltage v dss 60 v gate-to-source voltage v gss 20 v drain current (dc) i d 200 ma drain current (pulse) i dp pw 10 s, duty cycle 1% 800 ma allowable power dissipation p d when mounted on glass epoxy substrate (145mm ? 80mm ? 1.6mm) 0.15 w channel temperature tch 150 c storage temperature tstg --55 to +150 c electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit drain-to-source breakdown voltage v (br)dss i d =1ma, v gs =0v 60 v zero-gate voltage drain current i dss v ds =60v, v gs =0v 1 a gate-to-source leakage current i gss v gs = 16v, v ds =0v 10 a cutoff voltage v gs (off) v ds =10v, i d =100 a 1.2 2.6 v forward transfer admittance ? yfs ? v ds =10v, i d =100ma 140 240 ms static drain-to-source on-state resistance r ds (on)1 i d =100ma, v gs =10v 1.8 2.4 r ds (on)2 i d =50ma, v gs =4v 2.6 3.7 input capacitance ciss v ds =20v, f=1mhz 27 pf output capacitance coss v ds =20v, f=1mhz 8.6 pf reverse transfer capacitance crss v ds =20v, f=1mhz 4.4 pf continued on next page. tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan ordering number : ENA0529 32608pe ti im tc-00001268 specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer ' s products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer ' s products or equipment. any and all sanyo semiconductor co.,ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, av equipment, communication device, office equipment, industrial equipment etc.). the products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. if you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. if there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. sanyo semiconductors data sheet ec4408c n-channel silicon mosfet general-purpose switching device applications
ec4408c no. a0529-2/4 continued from preceding page. ratings parameter symbol conditions min typ max unit turn-on delay time t d (on) see specified test circuit. 13.5 ns rise time t r see specified test circuit. 11.5 ns turn-off delay time t d (off) see specified test circuit. 81 ns fall time t f see specified test circuit. 39 ns total gate charge qg v ds =30v, v gs =10v, i d =200ma 1.88 nc gate-to-source charge qgs v ds =30v, v gs =10v, i d =200ma 0.4 nc gate-to-drain ?iller?charge qgd v ds =30v, v gs =10v, i d =200ma 0.37 nc diode forward voltage v sd i s =200ma, v gs =0v 0.85 1.2 v package dimensions type no. indication electrical connection unit : mm (typ) 7036-001 switching time test circuit 2 4 1 3 3 1 4 2 0.5 0.2 0.3 0.8 1.0 0.6 0.6 top view bottom view polarity discriminating mark 1 : gate 2 : source 3 : drain 4 : drain sanyo : ecsp1008-4 ka top view polarity mark (top) gate source source gate drain drain *electrodes : on the bottom polarity mark (top) top view pw=10 s d.c. 1% p. g 50 g s d i d =200ma r l =150 v dd =30v v out ec4408c v in 10v 0v v in r g r g =1.2k
ec4408c no. a0529-3/4 i d -- v ds i d -- v gs drain-to-source voltage, v ds -- v drain current, i d -- ma gate-to-source voltage, v gs -- v r ds (on) -- v gs static drain-to-source on-state resistance, r ds (on) -- gate-to-source voltage, v gs -- v drain current, i d -- ma 50 300 100 150 200 250 0 0 60 20 140 100 180 80 40 160 120 200 0 1.0 0.8 0.6 0.1 0.2 0.4 0.9 0.7 0.3 0.5 it11263 0 1.0 0.5 2.0 3.0 1.5 2.5 3.5 4.0 it11264 02468 20 10 12 16 14 18 it11265 5.5 0 1.0 0.5 1.5 2.5 3.5 2.0 3.0 4.0 4.5 5.0 ta= 75 c 25 c -- 2 5 c ta=25 c v gs =3v v ds =10v 15v 5v 4v 8v i d =50ma 100ma 6v 10v r ds (on) -- ta static drain-to-source on-state resistance, r ds (on) -- ambient temperature, ta -- c it11266 --60 0 3.5 4.5 1.5 4.0 5.0 2.0 2.5 0.5 3.0 1.0 5.5 --40 --20 0 20 40 60 80 100 120 140 160 v gs =4v, i d =50ma v gs =10v, i d =100ma sw time -- i d ciss, coss, crss -- v ds ? y fs ? -- i d i s -- v sd drain current, i d -- a switching time, sw time -- ns drain current, i d -- ma forward transfer admittance, ? y fs ? -- s diode forward voltage, v sd -- v source current, i s -- ma drain-to-source voltage, v ds -- v ciss, coss, crss -- pf 7 5 7 100 10 5 3 2 3 2 it11269 it11267 0.01 0.1 23 5 2 7 1.0 357 0 5 10 15 20 10 5 3 7 3 2 7 5 2 it11270 it11268 0.4 0.5 0.6 0.7 0.9 0.8 1.0 1.1 1.0 10 7 5 3 2 2 100 7 5 3 2 v gs =0v --25 c 25 c ta= 75 c t d (on) t d (off) t f t r v dd =30v v gs =10v ciss coss crss 1.0 0.01 10 23 57 2 100 357 2 1000 357 0.1 7 5 3 2 7 5 3 2 v ds =10v 75 c ta= --25 c 25 c 1000 7 5 3 f=1mhz
ec4408c no. a0529-4/4 note on usage : since the ec4408c is a mosfet product, please avoid using this device in the vicinity of highly charged objects. sanyo semiconductor co.,ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein. sanyo semiconductor co.,ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. it is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of sanyo semiconductor co.,ltd. or any third party. sanyo semiconductor co.,ltd. shall not be liable for any claim or suits with regard to a third party? intellectual property rights which has resulted from the use of the technical information and products mentioned above. information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo semiconductor co.,ltd. product that you intend to use. in the event that any or all sanyo semiconductor co.,ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of sanyo semiconductor co.,ltd. ps p d -- ta ambient temperature, ta -- c allowable power dissipation, p d -- w v gs -- qg total gate charge, qg -- nc gate-to-source voltage, v gs -- v 0 0.2 0.6 1.0 0.4 0.8 2.0 1.4 1.2 1.6 1.8 0 1 2 6 4 3 7 8 9 5 10 it11271 v ds =30v i d =200ma 0 0 20 40 0.04 0.02 0.06 0.08 0.10 0.12 0.16 0.14 0.15 60 80 100 120 140 160 it13429 when mounted on glass epoxy substrate (145mm ? 80mm ? 1.6mm) this catalog provides information as of march, 2008. specifications and information herein are subject to change without notice.
|
